Products

HYDRAULIC VALVES

WATER WORKS

IRRIGATION

D SERIES - DIAPHRAGM OPERATORS HYDRAULIC CONTROL VALVES D-MV SERIES - MANUEL HYDRAULIC CONTROL VALVE D-ELV SERIES - SELONOID CONTROL VALVE D-PRV SERIES - PRESSURE REDUCING CONTROL VALVE D-QRV SERIES - PRESSURE RELIEF HYDRAULIC CONTROL VALVE D-PKV SEERIES - PUMP CONTROL VALVE D-PREL SERIES - PRESSURE REDUCING SELENOID CONTROL VALVE D-FLV SERIES - FLOAT CONTROL VALVE D-PSV SERIES - PRESSURE SUSTAINING CONTROL VALVE D-PRSV SERIES - PRESSURE REDUCING AND SUSTAINING CONTROL VALVE

FIRE FIGHTING

G SERIES - GLOB TYPE HYDRAULIC CONTROL VALVE G-PRV SERIES - PRESSURE REDUCING CONTROL VALVE G-QRV SERIES - PRESSURE RELIEF HYDRAULIC CONTROL VALVE G-FLV SERIES - FLOAT LEVEL CONTROL VALVE G-EL / 2W SERIES - SOLENOID CONTROL VALVE G-EL / 3W SERIES - SOLENOID CONTROL VALVE G-EFL SERIES - ELECTRICAL FLOAT CONTROL VALVE G-PSV SERIES - PRESSURE SUSTAINING CONTROL VALVE G-PRSV SERIES - PRESSURE REDUCING AND SUSTAINING CONTROL VALVE G-PREL SERIES - PRESSURE REDUCING SOLENOID CONTROL VALVE G-ECV SERIES - ELECTRONIC CONTROL VALVE G-DKV SERIES - FLOW CONTROL VALVES G-PKV SERIES - PUMP CONTROL VALVE G-REV SERIES - SURGE ANTICIPATING CONTROL VALVE G-CV SERIES - HYDRAULIC CHECKVALVE G-LCV SERIES - LIFT TYPE CHECKVALVE DQR / DIRECT ACTING RELIEF CONTROL VALVE DLG-EL / ELECTRIC ACTIVATION DELUGE ALARM VALVE DLG-P / PNEUMATIC ACTUATION DELUGE (DRY) ALARM VALVE DLG-ELP / ELECTRO-PNEUMATIC ACTIVATION DELUGE ALARM VALVE (PRE-ACTION)

MECHANICAL VALVES

KNIFE GATE VALVE SURFACE BOXES CHECK VALVE (CLASS 150) CHECK VALVE (DISC TYPE) CHECK VALVE (SPRING TYPE) CHECK VALVE (GLOBE TYPE) CHECK VALVE (BALL) CHECK VALVE (WAFER TYPE) CHECK VALVE (CLASS 125) CHECH VALVE (SWING TYPE) CHECK VALVE (VERTICAL TYPE) DISMANTLING JOINT FOOT VALVES SAFETY VALVES GLOBE VALVES GLOBE VALVE (CLASS 150) GLOBE VALVE (CLASS 125) BUTTERFLY VALVE (LUG TYPE) BUTTERFLY VALVES (DOUBLE FLANGE) BUTTERFLY VALVE (WAFER TYPE) STRAINER BASKET BALL VALVES (CLASS 150-300) BALL VALVE (PN10) BALL VALVE (PN16) BALL VALVE (THREADED) STRAINER (Y TYPE) IRRIGATION HYDRANT (DOUBLE OUTPUT) IRRIGATION HYDRANT (SINGLE OUTPUT) GATE VALVE RISING STEM (CLASS 150) GATE VALVE RISING STEM (CLASS 125) GATE VALVES (PN10) GATE VALVE RISING STEM (PN16) GATE VALVE RESILIENT SEATED (PN10) GATE VALVE RESILIENT SEATED (PN16) GATE VALVE (PN 16) GATE VALVE (WITH INDICATOR) GATE VALGE RISING STEM (PN10) FLOAT VALVE (ANGLE TYPE) FLOAT VALVE (FLAT TYPE) TILTING CHECK VALVE AIR VALVES FIRE HYDRANT (SHORT TYPE) FIRE HYDRANT (OVER GROUND)

G-FLV SERIES - FLOAT LEVEL CONTROL VALVE

G-FLV SERIES - FLOAT LEVEL CONTROL VALVE

PRODUCT DESCRIPTION

The float level control valves are hydraulic control valves that are used to control the water level of the water storing structures like cisterns, reservoirs, pressure reducing watering troughs, etc. that are being in the conduction lines. There must be minimum 7 meters water column pressure in the network for the main valves doing of the opening-closing up function.



1. Main Valve
2. Float
3. Needle Valve
4. Ball Valve
5. Strainer

PROPERTIES

Because of the float control valves structure is very simple, the usage of it is very advantageous to user.
The valves float assembly is modular. It is mounted at the desired manner easily to the structure which level control will be done.
The hydraulic hose placed between the main valve and the float assembly is mounted easily to the valve and the float assembly.
The float level control valve can be used as an opening-closing up valve with the help of the ball valve placed on it.
The valve works with the line pressure entirely hydraulic without needing any extra energy.



1. Float Control Valve
2. Isolation Valve
3. Air Release Valve
4. Float
5. Reservoir

OPERATING MANUAL

Mount the valve according to the arrow placed on the valve that shows the flow direction.
Mounting isolation valves (gate, butterfly or ball etc.) at the entrance direction for shutting-off the water in the line are recommended to ease the maintenance of the valve.
For the valves efficient working it is recommended to use an air relief valve before the valve.
Mount the float assembly of the float level control valve steadily to the reservoir. The main valve wont work if the float assembly is not steady.
After the float assembly mounted, get the mini ball valve placed on the main valve, as shown with 2, at the opened up position. When the mini ball valve is get to the closed up position, the main valve will close itself.
The hydraulic control valves are the control valves which working with the system pressure. In practice, the float level control valves must not be hydraulic, it must be mechanic float in the systems that their reservoir entrance pressure is near to zero. Please contact us for additional info.
Evacuate the water in the valves actuator to the atmosphere to prevent freezing in winter.