HYDRAULIC VALVES ▼
▼WATER WORKS
▶G SERIES - GLOB TYPE HYDRAULIC CONTROL VALVE
▶G-PRV SERIES - PRESSURE REDUCING CONTROL VALVE
▶G-QRV SERIES - PRESSURE RELIEF HYDRAULIC CONTROL VALVE
▶G-FLV SERIES - FLOAT LEVEL CONTROL VALVE
▶G-EL / 2W SERIES - SOLENOID CONTROL VALVE
▶G-EL / 3W SERIES - SOLENOID CONTROL VALVE
▶G-EFL SERIES - ELECTRICAL FLOAT CONTROL VALVE
▶G-PSV SERIES - PRESSURE SUSTAINING CONTROL VALVE
▶G-PRSV SERIES - PRESSURE REDUCING AND SUSTAINING CONTROL VALVE
▶G-PREL SERIES - PRESSURE REDUCING SOLENOID CONTROL VALVE
▶G-ECV SERIES - ELECTRONIC CONTROL VALVE
▶G-DKV SERIES - FLOW CONTROL VALVES
▶G-PKV SERIES - PUMP CONTROL VALVE
▶G-REV SERIES - SURGE ANTICIPATING CONTROL VALVE
▶G-CV SERIES - HYDRAULIC CHECKVALVE
▶G-LCV SERIES - LIFT TYPE CHECKVALVE
▶DQR / DIRECT ACTING RELIEF CONTROL VALVE
▶DLG-EL / ELECTRIC ACTIVATION DELUGE ALARM VALVE
▶DLG-P / PNEUMATIC ACTUATION DELUGE (DRY) ALARM VALVE
▶DLG-ELP / ELECTRO-PNEUMATIC ACTIVATION DELUGE ALARM VALVE (PRE-ACTION)
▼IRRIGATION
▶D SERIES - DIAPHRAGM OPERATORS HYDRAULIC CONTROL VALVES
▶D-MV SERIES - MANUEL HYDRAULIC CONTROL VALVE
▶D-ELV SERIES - SELONOID CONTROL VALVE
▶D-PRV SERIES - PRESSURE REDUCING CONTROL VALVE
▶D-QRV SERIES - PRESSURE RELIEF HYDRAULIC CONTROL VALVE
▶D-PKV SEERIES - PUMP CONTROL VALVE
▶D-PREL SERIES - PRESSURE REDUCING SELENOID CONTROL VALVE
▶D-FLV SERIES - FLOAT CONTROL VALVE
▶D-PSV SERIES - PRESSURE SUSTAINING CONTROL VALVE
▶D-PRSV SERIES - PRESSURE REDUCING AND SUSTAINING CONTROL VALVE
▼FIRE FIGHTING
▶G SERIES - GLOB TYPE HYDRAULIC CONTROL VALVE
▶G-PRV SERIES - PRESSURE REDUCING CONTROL VALVE
▶G-QRV SERIES - PRESSURE RELIEF HYDRAULIC CONTROL VALVE
▶G-FLV SERIES - FLOAT LEVEL CONTROL VALVE
▶G-EL / 2W SERIES - SOLENOID CONTROL VALVE
▶G-EL / 3W SERIES - SOLENOID CONTROL VALVE
▶G-EFL SERIES - ELECTRICAL FLOAT CONTROL VALVE
▶G-PSV SERIES - PRESSURE SUSTAINING CONTROL VALVE
▶G-PRSV SERIES - PRESSURE REDUCING AND SUSTAINING CONTROL VALVE
▶G-PREL SERIES - PRESSURE REDUCING SOLENOID CONTROL VALVE
▶G-ECV SERIES - ELECTRONIC CONTROL VALVE
▶G-DKV SERIES - FLOW CONTROL VALVES
▶G-PKV SERIES - PUMP CONTROL VALVE
▶G-REV SERIES - SURGE ANTICIPATING CONTROL VALVE
▶G-CV SERIES - HYDRAULIC CHECKVALVE
▶G-LCV SERIES - LIFT TYPE CHECKVALVE
▶DQR / DIRECT ACTING RELIEF CONTROL VALVE
▶DLG-EL / ELECTRIC ACTIVATION DELUGE ALARM VALVE
▶DLG-P / PNEUMATIC ACTUATION DELUGE (DRY) ALARM VALVE
▶DLG-ELP / ELECTRO-PNEUMATIC ACTIVATION DELUGE ALARM VALVE (PRE-ACTION)
MECHANICAL VALVES ▼
▶KNIFE GATE VALVE
▶SURFACE BOXES
▶CHECK VALVE (CLASS 150)
▶CHECK VALVE (DISC TYPE)
▶CHECK VALVE (SPRING TYPE)
▶CHECK VALVE (GLOBE TYPE)
▶CHECK VALVE (BALL)
▶CHECK VALVE (WAFER TYPE)
▶CHECK VALVE (CLASS 125)
▶CHECH VALVE (SWING TYPE)
▶CHECK VALVE (VERTICAL TYPE)
▶DISMANTLING JOINT
▶FOOT VALVES
▶SAFETY VALVES
▶GLOBE VALVES
▶GLOBE VALVE (CLASS 150)
▶GLOBE VALVE (CLASS 125)
▶BUTTERFLY VALVE (LUG TYPE)
▶BUTTERFLY VALVES (DOUBLE FLANGE)
▶BUTTERFLY VALVE (WAFER TYPE)
▶STRAINER BASKET
▶BALL VALVES (CLASS 150-300)
▶BALL VALVE (PN10)
▶BALL VALVE (PN16)
▶BALL VALVE (THREADED)
▶STRAINER (Y TYPE)
▶IRRIGATION HYDRANT (DOUBLE OUTPUT)
▶IRRIGATION HYDRANT (SINGLE OUTPUT)
▶GATE VALVE RISING STEM (CLASS 150)
▶GATE VALVE RISING STEM (CLASS 125)
▶GATE VALVES (PN10)
▶GATE VALVE RISING STEM (PN16)
▶GATE VALVE RESILIENT SEATED (PN10)
▶GATE VALVE RESILIENT SEATED (PN16)
▶GATE VALVE (PN 16)
▶GATE VALVE (WITH INDICATOR)
▶GATE VALGE RISING STEM (PN10)
▶FLOAT VALVE (ANGLE TYPE)
▶FLOAT VALVE (FLAT TYPE)
▶TILTING CHECK VALVE
▶AIR VALVES
▶FIRE HYDRANT (SHORT TYPE)
▶FIRE HYDRANT (OVER GROUND)
D-ELV SERIES - SELONOID CONTROL VALVE
PRODUCT DESCRIPTION
Practically, the solenoid control valves are hydraulic control valves which using electricity for doing the opening-closing up function remotely and automatically. A control device that can give electrical signals with the help of PLC control units or time relays, controls the solenoid control valves.
PROPERTIES
1. The solenoid valves used on the control valve can be 3/2 or 2/2 way valves for different applications.
2. The solenoid control valves can be selected optionally, normally closed up(N.C.) or normally opened up (N.O.).
3. The standart voltage value of the solenoid control valves is 24 Volt AC. But, there is an opportunity for selecting different voltage values like 9 Volt DC latching or 12 Volt DC bobbins.
WORKING PRINCIPLE
VALVE OPEN
When the user sends an electric signal to the 3/2 solenoid valve on the solenoid control valve by means of a control device, the solenoid valve closes the "P" port, preventing the line pressure from entering the solenoid valve. The pressurized water in the valve actuator passes through port "C" of the solenoid valve and reaches port "V" and the pressurized water in the valve actuator is evacuated to the atmosphere, opening the main valve fully.
VALVE CLOSED
When the user stops the electric signal from the control device, P "port switches to the open position and the" V "port switches to the off position by changing the solenoid core position in the solenoid valve. Thus, the line pressure solenoid valve reaches the port "C" from the port "P" and fills the actuator of the valve, thereby ensuring that the main valve is completely sealed.
SAMPLE MOUNTING AND APPLICATION SCHEME
1. Air Release Valve
2. Isolation Van (Gate, ButterflyValve etc.)
3. Solenoid Control Valve
4. Control Panel
OPERATING MANUAL
Mount the valve according to the arrow placed on the valve that shows the flow direction.
Mounting isolation valves (gate, butterfly or ball etc.) at the entrance direction for shutting-off the water in the line are recommended to ease the maintenance of the valve.
For the valve’s efficient working it is recommended to use an air relief valve before the valve.
Evacuate the water in the valve’s actuator to the atmosphere to prevent freezing in winter.
After mounting the main valve to the network, mount the solenoid valve’s electrical connector to the control device that you will use.
Select truely the cable’s diameter which used for electrical connection between the control device and the solenoid control valve, in the guidence of solenoid valve’s electrical specification and the distance.
The control device’s voltage value must be same with the solenoid valve’s voltage value.
Turn the ball valve as shown with 4 to the desired position to open and close up the main valve.
Clean the filter (strainer) as shown with 5 according to the water pollution degree.
1. Mini Ball Valve
2. Strainer
3. Solenoid Pilot Valve
4. 3-Way Ball Valve